Skip to main content

Swept Wings


A swept wing is a wing that angles either backward or occasionally forward from its root rather than in a straight sideways direction.

Forward Swept Wings
Backward Swept Wings


Why Do Airplanes Have Swept Wings?

If you look at commercial airplanes as well as many privately owned airplanes you’ll probably notice that most have swept wings. In other words, their wings don’t extend straight out from the sides. Instead, they angle backwards to form a V shape. Faster an airplane is intended to fly, the greater the angle of its wing sweep.

Swept Wings Are Longer Than Straight Wings

Using swept wings increases the total length of an airplane’s wings. If one airplane has swept wings, whereas a second airplane of the same type has straight wings, the former will have longer wings.  Swept wings are essentially longer than straight wings because they are angled backwards. And with longer wings, airplanes using swept wings perform differently than their straight-winged counterpart during flight.

Swept Wings Reduce Turbulence

The main reason airplanes have swept wings is to reduce turbulence. During flight, airplanes encounter turbulence from the friction created as air runs across the plane’s wings. The speed at which an airplane flies will affect the amount of turbulence is encounters. At faster speeds, airplanes encounter more turbulence due to the increased friction of the air running across its wings. In some cases, the air can travel faster than the speed of sound, resulting in heavily turbulence that’s not only a nuisance for passengers but also a danger to the aircraft’s structural integrity.

Swept wings, however, are designed to reduce turbulence by slowing down the air as it moves across the surface of the wings. As previously mentioned, swept wings are longer than straight wings. Therefore, air moves more slowly across them, which reduces the amount of turbulence the airplane encounters.

Backward vs Forward Swept Wings

Most airplanes have backward swept wings, meaning their wings are angled backwards. But some airplanes have forward swept wings, meaning their wings are angled forwards. Forward swept wings such as this are used in slow-flying airplanes. Featuring a forward sweeping angle of about 10 to 60 degrees on average, this design helps to produce more lift, thereby improving the airplane’s fuel efficiency while reducing turbulence in the process.



Labels:

Comments

Post a Comment

Popular posts from this blog

Aircraft Nose Cone

Why the Nose Cone in Aircraft is Important ?   Nose cone is also known as RADOME. As the Name Implies, it is the DOME which consists of Radar Equipment. The function of the radome is to protect the antennas installed in the nose of the aircraft from airflow, rain, hail, lightning strike, bird strike,etc. At the same time it must provide a radio-frequency transparent window, suitable for the microwave signals of the weather detection radar, instrument landing system and microwave landing system. The most demanding system in terms of radome radio frequency specification is the weather radar.   Nose Cone/Radome Sources of radome degradation   There are many reasons for the performance level of a radome to degrade below minimum requirements. They range from lightning strike, bird strike, natural erosion, water ingress for some types of radomes, ageing, poor, repairs such as wrong material used, or over-painting.   How a degraded radome affects t...
Post a Comment
Read more

737 Max Recertification Process

As we all know the Recertification flight test for 737 max completed on 1-July-20. This is 737-7 Aircraft. As per the FAA below are the list of process further required to ungrounding of the Aircraft. But this is applicable only to US, each country's regulator has to approve it to make sure Max is flying safe only then it is allowed in their Airspace. The remaining tasks include: JOEB Validation & FSB Review  – The FAA’s Flight Standardization Board (FSB) and the Joint Operations Evaluation Board (JOEB) which includes international partners from Canada, Europe, and Brazil will evaluate minimum pilot training requirements.  The FSB will issue a draft report for public comment addressing the findings of the FSB and JOEB. Final FSB Report  – The FAA will publish a final FSB report after reviewing and addressing public comments. Final Design Documentation and TAB Report  – The FAA will review Boeing’s final design documentation in order to evaluate compliance with al...
Post a Comment
Read more

Jet Engine - How it works

All jet engines, which are also called gas turbines, work on the same principle. 1. The engine sucks air in at the front with a fan. 2. A compressor raises the pressure of the air. The compressor is made with many blades attached to a shaft. 3. The blades spin at high speed and compress or squeeze the air. 4. The compressed air is then sprayed with fuel and an electric spark lights the mixture. 5. The burning gases expand and blast out through the nozzle, at the back of the engine. As the jets of gas shoot backward, the engine and the aircraft are thrust forward. As the hot air is going to the nozzle, it passes through another group of blades called the turbine. The turbine is attached to the same shaft as the compressor. Spinning the turbine causes the compressor to spin. The air goes through the core of the engine as well as around the core. This causes some of the air to be very hot and some to be cooler. The cooler air then mixes with the hot air at the engine exit area. ...
Post a Comment
Read more